Resource Hub
Floor Safety Articles & Guides
Plain-English answers on slip testing, the standards, and keeping people on their feet — straight from the work we do every day. Newest first.
- Anti-Slip Treatment for Porcelain Tiles: The Numbers Before and After
A porcelain tile, tested wet before and after an anti-slip treatment: real ASTM E303 and ANSI A326.3 numbers, not marketing claims. - Slip Resistance of Tiles: Why You Should Test Before You Install
A tile’s published slip-resistance number is measured in a lab, not on your job site. See how DCOF and pendulum testing verify it before installation. - The Florida Wet Floor Sign Law: Why the Sign Alone Won’t Protect You
Florida’s wet floor sign law turns on what you can prove, not the sign. The documented testing that actually limits your liability. - DCOF Requirements: The 5 ANSI A326.3 Minimums Your Floor Has to Hit
The five ANSI A326.3 DCOF requirements — 0.42, 0.50, 0.55 wet — explained by product-use category, so you can tell at a glance if a floor passes. - A Slip and Fall Just Happened at Your Business: The First 72 Hours
What you document in the first 72 hours substantially decides what the incident becomes. A practical playbook from auditors retained by both plaintiff and defense counsel. - Understanding Slip and Fall Liability in Florida — and How to Reduce the Risk
Slip and fall accidents are one of the leading causes of personal injury lawsuits in Florida, particularly for businesses open to the public. Property owners, facility managers, and business operators… - The Ultimate Guide to Slip Resistance Testing: SCOF vs DCOF vs PTV
Slippery floors are among the top causes of slip and fall accidents in commercial, industrial, and public spaces. Ensuring a floor is safe to walk on isn’t just about appearances—it’s… - The Truth about the BOT-3000E
Before we proceed, fair warning: this article goes beyond surface-level discussion. We’re going to get into the mechanics of friction testing, the physics of textured vs. polished surfaces, and how… - Importance of Regular Floor Safety Audits
Audit that Saves you Money Most of the hazards we find on audits were sitting in plain sight for weeks before anyone slipped. Regular floor safety audits catch those problems… - The Truth About 0.50 SCOF: Ancient Slip Testing Standards
One Little Number That’s Caused a Lot of Confusion You might’ve heard that a floor is “safe” if it has a slip resistance of 0.50. That number shows up in… - Understanding Slip Probability: The Science Behind Slip Resistance
The Real Meaning of Slip Probability Every slip starts with a mismatch between how much grip a person needs to walk and how much grip the floor actually provides. Measuring… - Slip Resistance and ASTM F2772: What It Means for Athletic Flooring Safety
When you design or specify athletic flooring, slip resistance sits alongside shock absorption and ball bounce as a property you have to get right. Get it wrong and players slide… - ASTM D2047 and the Limits of Static Slip Testing
ASTM D2047 is one of the oldest slip tests still on the books. It was first published in 1953 and uses the James Machine to measure the static coefficient of… - Keeping Children Safe from Slip and Falls: Essential Tips for Homes and Schools
Children fall. It comes with learning to walk, and most of the time a small bump is nothing to worry about. But some slips lead to real injuries, and those… - SCOF vs. DCOF: The Epic Battle of Friction Measurement
SCOF vs. DCOF: Choosing the Right Slip Resistance Test Two acronyms come up constantly in floor safety: SCOF and DCOF. At Walkway Management, we believe it’s time to set the… - Understanding Slip Potential for Your Business Floors: Prevent Accidents and Lawsuits
Are you at risk? When it comes to maintaining a safe and secure environment for your business, understanding the slip potential of your floors is crucial. Slip-and-fall accidents are one… - Different Tribometers for Slip Resistance Testing
Pendulum Slip Tester Slip Resistance Test Methods: ASTM E303-22, EN 16165, AS 4663, and others. Endorsed by the Ceramic Tile Institute of America (CTIOA). Validation for Pedestrian Traction: Validated by… - Important Updates to the 2024 International Swimming Pool & Spa Code
Walkway Management South Florida, a leading provider of walkway safety solutions, is excited to announce the release of the updated International Swimming Pool & Spa Code of 2024. These updates introduce important slip-resistance requirements that affect builders, contractors, architects, and pr - Understanding Slip and Fall Accidents: Causes, Consequences, and Prevention
“Preventing slip and fall accidents requires a combination of strategies, including regular maintenance and inspections, employee training, and the use of appropriate safety equipment. By implementing best practices for slip and fall prevention, businesses and organizations can create safer en - Why Should You Seal Your Travertine Pavers?
What people see when they first see your newly installed travertine, is not the hours of hard work in installing every piece of stone and getting it just right… What people first see is the final product of it. This is why, sealing your travertine is the most important part of the job! - Top 5 Tips for Making Tile Flooring Less Slippery
If you have tile flooring in your house, you are probably aware of both its benefits and drawbacks. On one hand, they retain water much better than other types of flooring. On the other hand, tile floors can be very slippery, particularly when wet. This may lead to injuries, including severe ones. T - Why ASTM C1028 Was Withdrawn (and What It Can’t Tell You)
Floor safety experts nationwide and internationally, have considered this test to be a joke for many years! Yet this joke continues to be no laughing matter since companies keep sending their products to be tested using this outdated, withdrawn scam of a test! - Understanding ANSI A326.3 Product Use Classifications – And When to Use the Right Tool for the Job
Tile Council of North America (TCNA) has announced the addition of a five-category “product use classification system” in ANSI A326.3 American National Standard Test Method for Measuring Dynamic Coefficient of Friction of Hard Surface Flooring Materials, published on February 2, 2022. - A Slip & Fall’s Prime Victim
My grandparents are no longer with us. I was very close to them and I loved them deeply. If they were still with us though, knowing the information I know now, I would do my absolute best to make sure all their floors are safe for them to walk on. I would make sure that their shower floors, bathtubs - How to Clean a Floor to Keep it Safe
Most restaurants and businesses have their hired workers clean their floors at the end of the day when everyone is tired and ready to go home. The cleaning usually means that someone takes a dirty mop with some water, that they may or may not have changed out since the previous cleaning, and adds so
Not sure which test your floor needs?
Skip the reading and just ask. Tell us the floor and the problem, and we’ll point you to the right measurement.