Why Your Expert Used a British Device and an Australian Scale
Why a slip-and-fall expert relies on the ASTM E303 pendulum and the AS 4586 P-scale: instrument selection follows the failure mode, not the passport.
-
-
Why a Greasy Floor Tests Better on the Seventh Swing Than the First
Pendulum readings rise across successive swings on contaminated floors because the slider removes the contaminant. Real ASTM E303 swing data and the ANSI A326.3 DCOF values that caught what the average missed.
-
Anti-Slip Treatment for Porcelain Tiles: The Numbers Before and After
A porcelain tile, tested wet before and after an anti-slip treatment: real ASTM E303 and ANSI A326.3 numbers, not marketing claims.
-
Slip Resistance of Tiles: Why You Should Test Before You Install
A tile’s published slip-resistance number is measured in a lab, not on your job site. See how DCOF and pendulum testing verify it before installation.
-
The Florida Wet Floor Sign Law: Why the Sign Alone Won’t Protect You
Florida’s wet floor sign law turns on what you can prove, not the sign. The documented testing that actually limits your liability.
-
DCOF Requirements: The 5 ANSI A326.3 Minimums Your Floor Has to Hit
The five ANSI A326.3 DCOF requirements — 0.42, 0.50, 0.55 wet — explained by product-use category, so you can tell at a glance if a floor passes.
